Logo



MGH10000 Master Premier Portable Honda Generator

This portable brush less generator is powered by a Honda GX620VXA3 Twin Cylinder Engine, 20.0 Hp @3600 rpm, overhead valves, oil pressure lube with oil filter, cast iron sleeves, large main ball bearings, low oil shutdown, dual element air cleaner, built-in balance shafts, electronic ignition, auto decompression, on-off switch, starting battery charger with Auto Idle speed control. It features a 13 gal. fuel tank, low-oil shutdown system, super quiet muffler, in-line fuel filter, and a 1" heavy duty roll cage. Additional features include hour meter, GFCI, duplex, twist lock receptacles, and full power switch. Wheel kit and handle accessories included.




MGH10000 Master Premier Portable Honda Generator



  • Built in Auto Idle on Honda Premier Series, Automatically reduces engine speed when no power is being used, which reduces fuel consumption and noise.
  • Rated Watts: 10,000
  • Max Watts:    11,000
  • Ratings apply to SAE standard conditions. Reduce ratings 3.5% for each 1000 feet above sea level and 1% for each 10 degree Fahrenheit rise above 60 degree F.
  • 120/240 Volts generator
  • 84.3/41.7 Amps generator
  • 60 Hertz generator
  • 1 Phase
  • Power Factor 1.0
  • Honda GX620VXA3 Twin Cylinder, 20.0 Hp Air Cooled Gasoline 4 Cycle Engine
  • Super Quiet Muffler System
  • 79 dBA Noise Level  
  • Electric Starter (battery not included)
  • 13.0 Gal Gasoline Fuel Tank, w/ gauge
  • 9.5 Hour Run Time under Full Load
  • 1-120V-20A Duplex Receptacle
  • 1-120V-15A GFCI Duplex Receptacle
  • 1-120V- L5-30R Twist Lock
  • 1-120/240V- L14-30R Twist Lock
  • 1-250V - 14-50R Receptacle (This receptacle is not connected through the auto idle circuit)
  • 6 Circuit Breakers
  • Hour Meter
  • ROLL CAGE, Full 1" welded square tubing, Black powder paint coated
  • Neoprene Rubber Vibration Isolators
  • Built- in Wheels and Handle
  • Size: 39.5" L x 22" W x 36.5" H
  • Unit Weight 335 lb.
ALTERNATORS:
Totally brush less design, all copper windings, Large sealed ball bearings, built-in fan, cast aluminum end flanges, class F/H insulation, skewed rotor laminations, Patented winding configuration for high quality power output. We reserve to amend these specifications at any time without notice. Check to be in accordance with state and/or local ordinances, regulations and codes.

 
Home : Master Distributors : NBMC.com
Company Policies : Contact Us

©2004 - 2011 New Beginnings Management Company, Inc.